The Ultimate Guide to Robotic Pool Cleaner Repairs: Troubleshooting & Maintenance Tips

Robotic pool cleaners have revolutionized pool maintenance, making it easier than ever to keep your pool clean without manual effort. However, like any piece of advanced technology, these machines can run into issues over time. If your robotic pool cleaner has stopped working or isn’t performing as expected, this guide will walk you through troubleshooting, common repairs, and essential maintenance tips to keep your device running efficiently.

Common Issues with Robotic Pool Cleaners and How to Fix Them

1. Robotic Pool Cleaner Not Moving

If your robotic pool cleaner is not moving, the problem could stem from several sources:

• Check the Power Supply: Ensure that the cleaner is properly plugged in and receiving power.

• Inspect the Power Cord: A damaged or tangled cord can prevent movement. Unplug, straighten, and inspect for wear and tear.

• Examine the Tracks or Wheels: Debris or wear can hinder movement. Clean the tracks/wheels or replace them if necessary.

• Look for a Clogged Filter: A clogged filter can reduce suction power, making the cleaner slow or completely immobile. Clean the filter thoroughly.

2. Robotic Pool Cleaner Not Picking Up Debris

If your cleaner moves but isn’t collecting debris effectively, try these troubleshooting steps:

• Check the Filter Basket or Bag: If it’s full, the cleaner may not pick up more debris. Empty and clean it.

• Inspect the Intake Valves: Debris stuck in the intake valves can block suction. Remove any obstructions.

• Verify Suction Power: If the pump is weak or blocked, it can impact debris collection. Clean the pump and impeller if necessary.

• Ensure Proper Water Flow: If the water jets are clogged, the cleaner may struggle to lift debris. Clean any buildup inside the machine.

3. Robotic Pool Cleaner Not Climbing Walls

Some robotic pool cleaners are designed to climb walls, but if yours suddenly stops doing so, here’s what you should check:

• Check for Slippery Pool Walls: Algae buildup can reduce traction. Brush and treat the pool water.

• Inspect the Brushes: Worn or missing brushes may need to be replaced.

• Adjust the Water Flow Settings: Some models allow adjustments to optimize climbing ability.

• Check the Power Supply & Motor: A failing motor may not generate enough power to climb walls.

4. Robotic Pool Cleaner Floating or Stuck in One Spot

If your robotic pool cleaner is floating or staying in one place, consider these solutions:

• Ensure the Unit is Fully Submerged: Air trapped in the cleaner can cause it to float. Tilt the unit underwater to release trapped air.

• Check the Floating Cable: A tangled cable can prevent movement. Lay it flat before starting the cleaner.

• Examine the Impeller: Debris in the impeller can affect propulsion. Clean it carefully.

• Verify Weight Distribution: Some models require additional weights to balance performance.

Routine Maintenance to Prevent Repairs

Preventive maintenance is key to extending the life of your robotic pool cleaner. Follow these steps regularly:

1. Clean the Filter After Every Use

Rinse the filter basket or bag with a hose after each cleaning cycle to prevent clogs and ensure efficient operation.

2. Inspect the Power Cord

Keep the power cord free from tangles and store it properly to prevent kinks or damage.

3. Check and Replace Worn Parts

Regularly inspect the brushes, wheels, tracks, and other moving parts for wear and tear. Replace them as needed.

4. Keep the Cleaner Dry When Not in Use

After use, remove the cleaner from the pool, allow it to drain, and store it in a shaded area away from direct sunlight.

5. Maintain Proper Water Chemistry

Unbalanced pool water can cause buildup inside the cleaner. Keep pH and chlorine levels within recommended ranges.

When to Seek Professional Repair Services

While many issues can be fixed at home, some problems require expert assistance. Contact a professional if:

• The motor or power supply unit fails.

• Electrical components are damaged.

• The cleaner experiences persistent operational failures despite troubleshooting.

• The unit has significant physical damage, such as cracks in the casing or broken internal components.

Conclusion

Robotic pool cleaners are a valuable investment for pool maintenance, but occasional repairs and maintenance are necessary to keep them in top condition. By troubleshooting common issues, following regular maintenance tips, and knowing when to seek professional help, you can ensure that your robotic pool cleaner continues to perform efficiently for years to come.

A well-maintained robotic pool cleaner means less time spent on pool upkeep and more time enjoying a pristine, hassle-free swimming experience!